i was using the usb though 
General Discussion: Everyones a fucking DJ!
Show original post
30 Mar 2010 15:10
15 Apr 2010 23:12
16 Apr 2010 00:35
8 May 2010 16:21
8 May 2010 16:32
8 May 2010 17:34
9 May 2010 11:50
Need a fuckers opinion.
Behringer b CONTROL 3000
http://www.amazon.co.uk/gp/product/B000VM05VG/ref=s9_simh_gw_p267_i3?pf_rd_m=A3P5ROKL5A1OLE&pf;_rd_s=center-1&pf;_rd_r=0S4TBN16CRSX578GVF0W&pf;_rd_t=101&pf;_rd_p=467198433&pf;_rd_i=468294
Or
Hercules Dj Control Steel.
http://www.amazon.co.uk/gp/product/B001JE7PVS/ref=s9_simh_gw_p267_i7?pf_rd_m=A3P5ROKL5A1OLE&pf;_rd_s=center-1&pf;_rd_r=0S4TBN16CRSX578GVF0W&pf;_rd_t=101&pf;_rd_p=467198433&pf;_rd_i=468294
To be used with future decks pro on a mac.cheers.
Behringer b CONTROL 3000
http://www.amazon.co.uk/gp/product/B000VM05VG/ref=s9_simh_gw_p267_i3?pf_rd_m=A3P5ROKL5A1OLE&pf;_rd_s=center-1&pf;_rd_r=0S4TBN16CRSX578GVF0W&pf;_rd_t=101&pf;_rd_p=467198433&pf;_rd_i=468294
Or
Hercules Dj Control Steel.
http://www.amazon.co.uk/gp/product/B001JE7PVS/ref=s9_simh_gw_p267_i7?pf_rd_m=A3P5ROKL5A1OLE&pf;_rd_s=center-1&pf;_rd_r=0S4TBN16CRSX578GVF0W&pf;_rd_t=101&pf;_rd_p=467198433&pf;_rd_i=468294
To be used with future decks pro on a mac.cheers.
total novice but someone on here must know. mates just given me some decks. stylus needs replacing on one of them but i set up the other to check it etc. tried two different mixers and connection cables but the sound only comes out of one speaker. it worked for a bit though now i can't get it back. why is this, is the turntable fucked? what do i do?
any help appreciated guys
any help appreciated guys
My 1210s are gathering dust but from what I remember-
It could still be the phono lead, but the one that's going from the turntable to the mixer which is damaged, they're normally wired in (presuming I've read your question correctly)
OR
It could be that the cartridge is damaged/ not wired up properly. There are four little pins in the headshell which are wired to the cart according to colour coding (2 each for L and R iirc), so if they aren't wired correctly or the contacts are damaged you might have a problem.
Most likely to be the phono lead, but if not, check the cart, and of course could be in the tonearm etc but pretty unlikely.
It could still be the phono lead, but the one that's going from the turntable to the mixer which is damaged, they're normally wired in (presuming I've read your question correctly)
OR
It could be that the cartridge is damaged/ not wired up properly. There are four little pins in the headshell which are wired to the cart according to colour coding (2 each for L and R iirc), so if they aren't wired correctly or the contacts are damaged you might have a problem.
Most likely to be the phono lead, but if not, check the cart, and of course could be in the tonearm etc but pretty unlikely.
Hey guys,
Looking for a bit of help & have been reading through this thread.. I'm looking to getting into DJ'ing to some extent.. I've been looking for a while now & can't decide what to go for.. All my music is stored on my computer & i like the sound of software controllers, although not too sure about the midi controllers within my price range (upto £400/500), plus they all seem a bit gimmicky.
What would be the best route for a complete newbie? I would like decks to be able to scratch to some extent & be able to hook up to my laptop for music selection/mix recording.
I'm really undecided between the following…
http://www.htfr.com/more-info/MR322901 NDX 400 decks
http://www.htfr.com/more-info/MR293537 M1 USB Mixer
http://www.htfr.com/more-info/MR273210 Pro 3 mixer
http://www.htfr.com/more-info/MR335439 CDi deck package
http://www.htfr.com/more-info/MR230782 Citronic decks
http://www.htfr.com/more-info/MR319003 Kam decks
http://www.htfr.com/more-info/MR286442 VCi 100
http://www.htfr.com/more-info/MR276240 Numark Omni Control
http://www.htfr.com/more-info/MR335539 Numark Mixdeck (Pricy but like the idea)
Any help would be much appreciated.
Cass
Looking for a bit of help & have been reading through this thread.. I'm looking to getting into DJ'ing to some extent.. I've been looking for a while now & can't decide what to go for.. All my music is stored on my computer & i like the sound of software controllers, although not too sure about the midi controllers within my price range (upto £400/500), plus they all seem a bit gimmicky.
What would be the best route for a complete newbie? I would like decks to be able to scratch to some extent & be able to hook up to my laptop for music selection/mix recording.
I'm really undecided between the following…
http://www.htfr.com/more-info/MR322901 NDX 400 decks
http://www.htfr.com/more-info/MR293537 M1 USB Mixer
http://www.htfr.com/more-info/MR273210 Pro 3 mixer
http://www.htfr.com/more-info/MR335439 CDi deck package
http://www.htfr.com/more-info/MR230782 Citronic decks
http://www.htfr.com/more-info/MR319003 Kam decks
http://www.htfr.com/more-info/MR286442 VCi 100
http://www.htfr.com/more-info/MR276240 Numark Omni Control
http://www.htfr.com/more-info/MR335539 Numark Mixdeck (Pricy but like the idea)
Any help would be much appreciated.
Cass
I'd personally stay away from cheaper hardware stuff like Kam, Citronic and Gemini.. You get what you pay for and I've worked at loads of places who've gone through a unit every month and ended up paying the extra for Denon or Pioneer.
Keep your laptop and get the basics down with a controller and blag a go on other peoples decks when you get a chance.
Keep your laptop and get the basics down with a controller and blag a go on other peoples decks when you get a chance.
My mate has a Numark Omni controller, a half decent laptop and a good set of active monitors, works a treat. Although the controller is tricky to set up with Traktor but you're only going to need to do it once anyway.
Personally I prefer a set of vinyl turntables, half decent mixer, and 300watts of bass
Personally I prefer a set of vinyl turntables, half decent mixer, and 300watts of bass
Yeah i would like vinyl turntables, but getting hold of a decent vinyl collection would be far too expensive…
Anyone got any experience/comments on the VCI-300? http://www.htfr.com/more-info/MR266242
Anyone got any experience/comments on the VCI-300? http://www.htfr.com/more-info/MR266242
Sign in to post in this thread.